(15)
stopw-h&timing mechanism (n， fig. 2). this w-h，可燃性， by means of
spe-l attachments， is actuated to a start by connection with the gas jet (e，
fig. 2). a driving mechanism on rear of cabinet ( s， fig. 2) moves the
gas jet to its most forward ition&automatically starts the timing at the
moment of flame impact. the falling weight (h，供應紡織品阻燃可燃性測試儀， fig. 2)， when caused to move by
severance of cord (f， fig. 2)， s the w-h. timing is read directly.
15 秒表和計-構n，圖2。該表通過特殊附件，通過與氣體噴射器e，圖2的連接啟動。機柜后部的驅動機構s，圖2將氣體射流移動到其前面的位置，紡織品可燃性測試儀，并在火焰沖擊時自動開始計時。落錘，圖2因繩索f，圖2的分離而移動時，使手表停止轉動。計時是直接讀取的。
(8)
pulley/eye (g 5 ， fig. 2). the pulley/eye is the support
and guide for the stop cord. other guides are specifically identified as the skyhook (g1 )，
the l-shaped guides (g2，供應紡織品可燃性測試儀， g3)&a pigtail guide (g6).see
§1610.61(c)(1) for a clarification of the stop cord ition.
8 滑輪或環眼g 5，圖2。滑輪或眼是停止線的支撐和引導
g其他導軌被明確標識為天鉤g1、l形導軌g2、g3和尾光纖導軌g6。有關停止線位置的說明，請參見§1610.61c1。
(9)
stop weight (h， fig. 2). the weight， attached by means of a clip to the
stop cord， in dropping actuates the stop motion.
9 停止重量，圖2。在下降過程中，通過夾子連接到停止線上的重量驅動停止運動。
(10) slide door control
(i， fig. 2). this knob moves the c-h mechanism used to hold the sliding
door in an open ition for insertion of test specimen racks.
登錄后臺
